|
Item
|
Project detail
|
|
Location
|
Brazil
|
|
Industry
|
Ferrochrome production
|
|
Equipment
|
Multiple automated metallurgical cranes
|
|
Handling focus
|
Raw material handling and feeding
|
|
Key functions
|
Centralized remote control; automatic hook engagement and disengagement; positioning and anti-sway
|
|
Project stage
|
Equipment put into operation
|
Henan Mine supplied multiple automated metallurgical cranes for a ferrochrome project in Brazil. The equipment has been put into operation, combining centralized remote control, automated material handling, positioning, anti-sway functions, and equipment monitoring.

| Item | Project detail |
| Location | Brazil |
| Industry | Ferrochrome production |
| Equipment | Multiple automated metallurgical cranes |
| Handling focus | Raw material handling and feeding |
| Key functions | Centralized remote control; automatic hook engagement and disengagement; positioning and anti-sway |
| Project stage | Equipment put into operation |
The project addresses material handling in ferrochrome production. Its focus is the sequence of handling and feeding operations rather than the supply of a crane defined only by rated capacity.
Henan Mine developed the equipment around the project’s operating requirements, integrating automated handling functions with control and monitoring. The supplied cranes support the movement of raw materials through the feeding process.
The cranes use a centralized remote intelligent control system. The described automation scope includes hook engagement, disengagement, and material feeding, allowing these steps to be incorporated into the controlled handling sequence.
This scope is relevant to operators seeking to reduce manual intervention in repetitive handling tasks. For another plant, the required sequence and the tasks retained under operator control should be specified against its own production process.
The automated system supports locating hoppers and grabbing raw materials for the feeding operation. These functions connect the crane’s movement to the material-handling points used by the production process.
The arrangement makes the relationship between the crane and the feeding locations a central part of the project. Material characteristics, pickup positions, and destination points are useful starting inputs when discussing comparable automation.
A positioning algorithm works with the crane’s anti-sway function to support load stability and controlled transfer. The combination addresses both where the equipment moves and the movement of the suspended load during handling.
The project description identifies these as equipment functions. For a new installation, any required positioning tolerance or handling cycle should be defined in the technical scope and evaluated under agreed operating conditions.
The cranes include safety protection and equipment-status monitoring functions. Operating information and lifecycle management support visibility of the equipment’s condition and maintenance requirements.
The Brazilian ferrochrome project has reached the operating stage. It provides a reference for integrating remote control, feeding automation, positioning, and monitoring within metallurgical material handling.
Start with a process description showing the pickup points, hoppers, materials, and required handling sequence. Include load information, layout drawings, and the operating schedule, together with the functions that the plant expects to automate.
Identify the control interfaces and the information needed by operators and maintenance personnel. This helps turn a general request for an automated crane into a defined handling and control scope for technical discussion.
What production process does this case support?
The cranes support raw material handling and feeding for a ferrochrome project in Brazil.
Has the equipment been put into operation?
Yes. The supplied automated metallurgical cranes have been put into operation at the project.
Share the material flow, hopper locations, and proposed operating sequence. We can discuss the crane handling and control functions relevant to your process.
Related equipment:

This is the first launcher gider crane exported to Paraguay by hycrane company, 100 tons

Our equipment solves the limitation problem of customer site,and provide support for building Bridges

Project in Uzbekistan: LD 10T & LD 16T overhead crane have been complete the installation work
Whatsapp